Log in
Forum » Middle East
Loading...
Topic

Does the LCA must cover the 100% of building envelope and structural elements?

NC-v4 MRc1: Building life-cycle impact reduction
posted by Sara YOUSSOUFI on Oct 16, 2019, 12:20 pm

To earn the 3 points on this credit, Question 1: Do I need to know life cycle analysis for 100% of my structural and envelope products? Even small products like tightness, ...? steel that exists...

Last reply: Panu Pasanen, Oct 18, 2019, 4:15 am

SSP1 scope

NC-v4 SSp1: Construction Activity Pollution Prevention
posted by Adam Insan on Oct 16, 2019, 11:47 am

Hi, 

We are working on LEED project as general contractor in middle east which is registered under LEED new construction. 

As a part of compliance with SSP1, we have implemented...

municipality irrigation line

CS-v4 WEc1: Outdoor water use reduction
posted by Radwa Amin on Apr 1, 2017, 11:54 am

the district that the project is located in has a municipality water line dedicated to irrigation and it is not potable water (recycled).
Does that count as an alternative water sources?...

Last reply: Lina Bourgeois, Oct 15, 2019, 3:26 am

Modeling baseline with System 2 of proposed hotel building with system 8

CS-v4 EAp2: Minimum Energy Performance
posted by Natalia Quintanilla on Oct 9, 2019, 6:32 pm

Hi, 

I'm modeling a 12-floor hotel building located in Dubai that uses System 8:...

Last reply: Natalia Quintanilla, Oct 14, 2019, 2:50 pm

ASHRAE 90.1.2010 Mandatory & Prescriptive Requirements vs Energy Model

CI-v4 EAc2: Optimize Energy Performance
posted by Nikhil Kumar on Oct 9, 2019, 9:57 am

Hi to all,

I am doing energy model for one of our LEED CI Project under v4 rating system. 

The following contents are copied from reference guide,

Option 1. Tenant-level...

Last reply: Marcus Sheffer, Oct 11, 2019, 10:17 pm

Can consider the air cooled chiller yard as central plant

CI-v4 EAp2: Minimum Energy Performance
posted by Nikhil Kumar on Oct 9, 2019, 10:23 am

Hi to all,

Greetings!

I am doing Energy Model as per design documents of office space which has target for LEED ID+C Gold v4.

The baseline system should be System 8 (...

Last reply: Marcus Sheffer, Oct 11, 2019, 9:50 am

ASHRAE 90.1.2010- Baseline System using Exception of G3.1.1

CI-v4 EAp2: Minimum Energy Performance
posted by Nikhil Kumar on Oct 2, 2019, 2:01 am

Hi,

Greetings!

We are doing the energy model for Office space which has registered under LEED ID+C v4. The overall floor area of the project space is 45,000 Sq.ft & the overall...

Last reply: Nikhil Kumar, Oct 2, 2019, 8:49 pm

Display signage requirements

NC-v4 SSc6: Light Pollution Reduction
posted by Neetika Parmar on May 5, 2019, 3:23 am

Hi 

I have a question regarding the external signage requirement. Our project plans to have a totem signage with digital display. Does this need to meet the requirement as specified by...

Last reply: Bill Swanson, Sep 11, 2019, 11:31 am

LEED NC (BD+C)- High Rise Residential Building- CO monitoring

NC-v4 EQp1: Minimum indoor air quality performance
posted by Srinivasan M on Oct 1, 2017, 9:46 am

Hi,

We are working on a high rise residential building, which is 100% mechanically ventillated. we have incorporated all requirements in our design to meet the...

Last reply: Asa Foss, Sep 9, 2019, 4:16 pm

Adding wings to a non-certified building

NC-v4 MPR2: Must use reasonable LEED boundaries
posted by Mario S. on Sep 4, 2019, 9:10 am

We have a case of an existing hospital building, and the owner now wishes to add 2 wings to it; one on its west side and the other on its east.

In terms of physical connection, the 2 wings...

Last reply: Tristan Roberts, Sep 4, 2019, 10:35 am