Topic | Recent |
---|---|
Hot-Dipped Galvanized Metal inherently non-emitting?NC-v4 EQc2: Low-emitting materialsposted by Heather DeGrella on Sep 21, 2017, 12:09 pm
Inherently non-emitting sources cover materials such as "stone, ceramic,powder-coated metals, plated or anodized metal, glass, concrete, clay brick, unfinished or untreated solid... Last reply: Nash Emrich, Dec 16, 2022, 1:25 pm |
|
Table 6.5.3.1.1A Maximum allowed fan powerCS-v4 EAc2: Optimize Energy Performanceposted by Sarah Leenknegt on Dec 15, 2022, 4:35 am
Hi The maximum allowed fan power per... Last reply: Tyler Thumma, Dec 16, 2022, 11:30 am |
|
Proposed interior lighting power allowanceNC-v4 EAp2: Minimum Energy Performanceposted by Ricardo Sá on Dec 15, 2022, 10:26 am
Hello, we’re currently involved in the LEED Certification of a new building to be built in Portugal. In what relates with energy performance, we have a doubt related with proposed interior... Last reply: Marcus Sheffer, Dec 16, 2022, 11:28 am |
|
CO2 Sensors being connected to the BMS System of the buildingCS-v4 EQc1: Enhanced indoor air quality strategiesposted by Aishwarya Chengappa on Dec 6, 2022, 5:55 am
We have a project that consists of majorly tenant fit outs and all the densely occupied spaces within these areas will have CO2... Last reply: Mohammad H Abbasi, Dec 16, 2022, 11:25 am |
|
Clean Room HVAC as process load?NC-v4 EAp2: Minimum Energy Performanceposted by Maria Papiez on Apr 1, 2022, 1:21 pm
We are working on a project that includes spaces used to manufacture healthcare instrumentation in a clean room environment. The client’s Engineering Standards as well as ISO 14644-1 Standard... Last reply: Tyler Thumma, Dec 16, 2022, 10:19 am |
|
Voltage Drop // mandatory provisions ASHRAE 90.1- 2010- ADDENDA 10218NC-v4 EAp2: Minimum Energy Performanceposted by Sara BENLOUBA on Nov 22, 2022, 8:41 am
Hello everybody, We are working on a project under LEED V4 certification. ABOUT PREREQUISITE “MINIMUM ENERGY PERFORMANCE” , we must comply with the ASHRAE mandatory provisions and... Last reply: Tyler Thumma, Dec 16, 2022, 10:13 am |
|
ASHRAE 90.1 Section 6.5.3NC-v4 EAp2: Minimum Energy Performanceposted by Michael Abramson on Nov 16, 2022, 4:13 pm
Good afternoon all, Going over the 6.5.3 fan power limitation and... Last reply: Tyler Thumma, Dec 16, 2022, 9:52 am |
|
Lighting Power Density in LEED v4.1 MEPC CalculatorNC-v4.1 EAp2: Minimum Energy Performanceposted by Gopinath Vasu on Nov 18, 2022, 1:47 am
Hi, I have a question in LEED v4.1 Minimum Energy Performance Calculator. The "6a_Lighting Counts tab" takes the input of Occupancy sensor type in the proposed design for each... Last reply: Tyler Thumma, Dec 16, 2022, 9:49 am |
|
Exhaust energy recovery unitsNC-v4 EAp2: Minimum Energy Performanceposted by Samer Hassanie on Nov 18, 2022, 10:26 am
Hi, We have been getting the following comment from several reviewers: "It is not clear if the preheat controls have been modeled as required by section G3.1.2.3. Note that the... Last reply: Tyler Thumma, Dec 16, 2022, 8:32 am |
|
Baseline SFP for tenant fan-coilsCS-v4 EAp2: Minimum Energy Performanceposted by Ricardo Sá on Nov 14, 2022, 7:43 am
Dear all, we’re currently involved in the LEED v4 Core & Shell certification of a new office building. This building will have a central HVAC system serving both common areas and... Last reply: Tyler Thumma, Dec 16, 2022, 8:11 am |