Topic | Recent |
---|---|
building complete 1993 or laterEBOM-2009 WEc2: Additional Indoor Plumbing Fixture and Fitting Efficiencyposted by Rachael McClain on Mar 10, 2010, 1:47 pm
I am confused by the table above with the tab that says building completed 1993 or later its says the baseline is 160%, the table also has a tab that says fixtures installed after 1993 or later,... Last reply: Jason Franken, Mar 11, 2010, 10:55 am |
|
questionsGeneral forumsposted by Armen Khachikyan on Mar 11, 2010, 7:41 am
I've read practically all available resources, but I didn't find some details. Last reply: Jean Marais, Mar 11, 2010, 7:53 am |
|
Estabilishing the Energy use baselineEBOM-2009 EAp2: Minimum Energy Efficiency Performanceposted by RASHID HAMEEN on Mar 9, 2010, 4:43 am
we are a Sri Lankan company and we are planning on going for LEEDS EB OM certification. As we are a foreign entity we are facing problems on how to establish the Energy use base line.Further if... Last reply: Jenny Carney, Mar 10, 2010, 9:45 am |
|
Temporary wood structures and MRc7: Certified WoodGeneral forumsposted by Tristan Roberts on Mar 8, 2010, 10:36 am
Tri, here is the advice on temporary... Last reply: Tristan Roberts, Mar 10, 2010, 7:26 am |
|
CI in a certified CS buildingGeneral forumsposted by Leticia SooHoo on Mar 3, 2010, 3:20 pm
Andrea, I had a Twitter conversation with Lauren yesterday. LEED geek talk! I went through a similar scenario for a v2.2 project. The building was already CS certified. The tenant would take over... Last reply: Leticia SooHoo, Mar 10, 2010, 12:49 am |
|
SMACNA Chapter 3... Occupied buildings only?NC-2009 IEQc3.1: Construction IAQ management plan - during constructionposted by Maya Karkour on Mar 5, 2010, 11:39 am
Hi, Last reply: David Posada, Mar 9, 2010, 2:06 pm |
|
EBOM TemplatesGeneral forumsposted by John Hartley on Jan 12, 2010, 2:45 pm
Dan, from what you say above, is it not possible then to get the LEED Online templates without first completing the PR's? Does anyone have screen captures (unofficial of course)? Thanks... Last reply: Tristan Roberts, Mar 8, 2010, 1:35 pm |
|
Definition of non-potableEBOM-2009 WEc3: Water Efficient Landscapingposted by Jeff Buitendorp on Mar 4, 2010, 7:24 am
We have a facility that has a well system for irrigation only. The water has been tested and is not suitable for drinking without shock treating the well. The facility is on a municipal supply... Last reply: Corinna Kester, Mar 7, 2010, 7:33 pm |
|
Norwegian StandardGeneral forumsposted by Christopher Schaffner on Mar 5, 2010, 4:05 pm
LEED wants you to use ASHRAE 90.1. You might have a chance arguing that the Norwegian standard is equivalent, or more stringent, but you would need to prove that in your submission. How... |
|
CxANC-2009 EAc3: Enhanced Commissioningposted by Shriram Bhide on Mar 5, 2010, 12:57 pm
Thanks Kath, |