It doesn't seem like this credit should be so complicated. We have a full DDC system in the new building, which is part of a campus. We already have a Honeywell team on site to monitor other...

With a 54 unit highrise condo, what would be acceptable to meter to meet the requirements of the credit. Individual unit electric meters? I can't imagine putting CTs on 130 individual heat pump...

If an energy model has been reviewed during design phase submission and PVs are added during construction but were not included in the model, can the model be rerun and resubmitted during the...

We are working on an eQuest model of a very unusual building. It was constructed in 1911. The original building had a lower level, first and second floor in the main wing and four stories of...

I have two buidings on the same site/project boundry.

Do I model the two buildings as one building? If I did two seperate models I am not sure how I would show this on the LEED Credit...

Appendix G (Table 3.1) states that lighting power for building facades has to be modeled in the energy simulation. However, it is not clear if landscape lighting should also be taken into account...

For those of you that use Trace 700 and are familiar with the fairly new feature, the "LEED Energy Performance Summary Report", that Provides all the information for each section of the EAp2...

I have to model a building which is using solar pannels electric heaters. But they also have an electric resistance as back up for those moments when solar heat is not enough.
How should I...

I have a general code question regarding when a wall is considered interior and when it is considered exterior, as our team has looked for clear language in the NYS energy code as well as the...

We are doing LEED certification for a building in a campus which already has exterior lighting installed. Can we consider the exterior lighting load identical for base case and proposed case as...