| Topic | Recent |
|---|---|
MERV Filter during and after Test runNC-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by Yong Lee Low on Mar 3, 2011, 12:47 am
Regarding the... Last reply: Allison Beer McKenzie, Mar 3, 2011, 9:34 am |
|
How to show 100% InfiltrationNC-2009 SSc6.1: Stormwater design - quantity controlposted by Kenneth Bailey on Feb 25, 2011, 11:09 pm
Our project is the only development on a small, flat, island. The surface is sand or sandy topsoil and is extremely porous. After development, the only impervious surfaces will be roofs, some... Last reply: Amy Rider, Mar 2, 2011, 6:19 pm |
|
ASHRAE 90.1-2007 Lighting Compliance DocumentationCI-2009 EAp2: Minimum Energy Performanceposted by Natalie Terrill on Mar 2, 2011, 1:21 pm
Page 3 of the ASHRAE Lighting Compliance Documentation has a table for Interior Lighting Compliance Test for Additional Lighting which reads Total Additional Interior Lighting Power Allownace (... Last reply: Paul Conrad, Mar 2, 2011, 3:38 pm |
|
Energy Modelling For Standarg GNC-2009 EAc1: Optimize Energy Performanceposted by Mauricio Ramirez on Mar 1, 2011, 6:08 pm
Hello. i have a doubt about this credit. Last reply: David Hubka, Mar 2, 2011, 2:36 pm |
|
Confused about Exemplary vs. Innovation creditsNC-2009 IDc1: Innovation in Designposted by Susan Robertson on Jan 28, 2010, 12:49 pm
I am confused about this information -- are we able to potentially earn all 26 exemplary points plus a potential for 5 innovation credits? Or if we choose to take some exemplary points, are we... Last reply: Susann Geithner, Mar 2, 2011, 2:22 pm |
|
IEQ Prereq 1- Template/Form IssuesNC-2009 IEQp1: Minimum indoor air quality performanceposted by Nathan Romblad on May 26, 2010, 3:01 pm
The template requires data be entered for both Ez and Ev. From what I read in ASHRAE 62.1-2007 Ez is not related to your Vot if you have a multi-zone system. In additional unless your... Last reply: Kirk Simoneaux, Mar 2, 2011, 12:52 pm |
|
geographic issuesPilot-Credits PC9: Street Networkposted by Christina Lynch on Mar 2, 2011, 9:56 am
The project site I am dealing with has a varied topography (outside Pittsburgh, PA), and I believe the geographic limitations of the site and surroundings made it difficult to meet the required... |
|
European Certificates accepted?NC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Nicole Isk on Feb 14, 2011, 9:25 amTristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up February 14, 2011- 9:43 am Simone, I think you had similar questions on IEQc4.1 and IEQc4.3. As discussed on those forums, this certifiations would not be accepted right now by USGBC, although that could change in the future.What are your thoughts? Log in or register to post comments Susann Geithner Principal Emerald Built Environments LEEDuser Basic Member 1297 thumbs up February 14, 2011- 11:07 am I agree. You can't used the European certificates, but we have applied for these credits successfully... Last reply: Reinhard Oppl, Mar 2, 2011, 8:20 am |
|
Capturing heat recapture for absorption dhillersNC-2009 EAc1: Optimize Energy Performanceposted by Vanessa Seibert on Feb 28, 2011, 12:42 pm
We are working on a college campus that will have a new central plant. We have a onsite micro turbine generators that provide power to the site. The heat from those turbines is used as a heat... Last reply: David Hubka, Mar 2, 2011, 7:43 am |
|
CHPS Enough to qualify?Schools-2009 IEQc4.3: Low-Emitting Materials—Flooring Systemsposted by Linda Davisson on Mar 2, 2011, 7:27 am
If a product is listed on the CHPS Low Emitting Materials Table (LEM) does it demonstrate compliance with the CA Department of Health Standard? Last reply: Josh Jacobs, Mar 2, 2011, 7:43 am |
