Topic | Recent |
---|---|
All exterior mounted fixturesSchools-2009 SSc8: Light Pollution Reductionposted by Suzanne Allerton on Feb 27, 2012, 1:40 pm
Do facade mounted fixtures need to be shown on the photometric plan? |
|
Areas to be consideredCS-2009 IEQp1: Minimum indoor air quality performanceposted by Angela Saggin on Feb 27, 2012, 12:38 pm
Hi! What areas/rooms should we consider inside an appartment for the calculation of naturally ventilated spaces? For example, the master bedroom has a dressing room and a bathroom, should... |
|
Fuel for district energy and electricityNC-2009 MRc2: Construction Waste Managementposted by Tanja Arnesson on Nov 30, 2011, 3:08 amin January- http://www.usgbc.org/DisplayPage.aspx?CMSPageID=2360. LEEDuser will most likely have another Guide and Open Forum as well where you could post your concerns instead for this credit. Susann – Your... Last reply: Keith Robertson, Feb 27, 2012, 11:18 am |
|
To include microwaves?CI-2009 EAc1.4: Optimize energy performance - equipment and appliancesposted by Simon Ng on Feb 15, 2012, 7:14 pm
Dear All, We are trying to pursue EAc1.4 for our current library proposal. At this moment in time there are no microwave ovens that are energy star rated, so this would be classed an... Last reply: Peter Doo, Feb 27, 2012, 9:34 am |
|
Zero lot line with lighting on the facadeNC-2009 SSc8: Light Pollution Reductionposted by Mathilda Jonsson on Feb 27, 2012, 8:55 am
Hi all! |
|
A Learning Center to Support Farming on Prime Farm LandNC-2009 SSc1: Site Selectionposted by Brooks Critchfield on Jul 8, 2011, 9:02 am
We have a project in a rural area sited on an existing farm. The project is very small in scale and will have a very small development footprint to preserve the land and to make as little impact... Last reply: Steve Loppnow, Feb 26, 2012, 6:06 pm |
|
LEED boundary questionNC-2009 SSc1: Site Selectionposted by Mark Meaders on Aug 29, 2011, 11:44 am
I am working on a project that is being completed in 2 phases. Last reply: Steve Loppnow, Feb 26, 2012, 5:42 pm |
|
ASHRAE 90.1-Envelope Fenestration & Skylight Fenestration areaNC-2009 EAp2: Minimum Energy Performanceposted by Natalie Tan on Feb 24, 2012, 4:37 pm
Hi, We have a new 400m2 dining hall project in Climate zone 1, and would like to seek advice on the compliance for having to meet the maximum 40% for vertical fenestration area as well as not... Last reply: Marcus Sheffer, Feb 24, 2012, 6:16 pm |
|
Contradiction for Pressurized HallwaysNC-2009 IEQp1: Minimum indoor air quality performanceposted by Omer Moltay on Feb 24, 2012, 5:16 pm
Some sources (including LEED User) suggest that hallways pressurized with mechanical ventilation can be used to ventilate spaces in dwelling units that are adjacent to the unit entry door through... |
|
CS for a single tenant build-to-suitLEED Rating System Selectionposted by Ben Tucker on Feb 23, 2012, 6:26 pm
Our client (building owner) has a tenant interested in an 80,000 sf existing building. To accomodate the tenant's space needs as well as their requests for a LEED building, our client plans to... Last reply: Ben Tucker, Feb 24, 2012, 3:35 pm |