Log in
Forum
Topic

Using AEDG

NC-2009 EAp2: Minimum Energy Performance
posted by David Tratt on May 10, 2012, 4:49 pm

There are two AEDG's for small office buildings. Which should be used for a 12,000 sf building to achieve the 10-14% improvement over 2007? The 30% or the 50%?

Last reply: Marcus Sheffer, May 10, 2012, 5:04 pm

Floor not yet occupied for simulation

NC-2009 EAp2: Minimum Energy Performance
posted by Marcio Alberto Casado Pereira on May 10, 2012, 10:39 am

I have a 3 storey office building pursuing LEED NC. 2 of the 3 pavements are going to be occupied right after the construction, while the 3rd one will be occupied only 2 years later. There is no...

Last reply: Marcus Sheffer, May 10, 2012, 3:39 pm

Which area type should be considered for simulation?

CS-2009 EAc1: Optimize Energy Performance
posted by Fabiano Castro on May 8, 2012, 8:35 am

A question has been raised regarding which space area (GROSS or NET) should be considered into the simulation thermal blocks conception in order to result in the most accurate results. The...

Last reply: Fabiano Castro, May 10, 2012, 12:56 pm

Low VOC content for treated wood products

NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Matthew Perna on Jul 29, 2011, 11:31 am

Are preservative-treated and fire-treated...

Last reply: Nadia Ayala, May 10, 2012, 12:47 pm

Owned land for 150+ years

Schools-2009 SSp2: Environmental Site Assessment
posted by Maura Adams on May 10, 2012, 10:30 am

The building is on a campus owned by the school for over 150 years. Before that, the land was part of a farming community. It's pretty much impossible for it to be contaminated. Could we get an...

Last reply: Larry Sims, May 10, 2012, 12:32 pm

HELP

EBOM-2009 SSc8: Light Pollution Reduction
posted by Dorilee Torres on May 10, 2012, 9:27 am

Hi

I dont understand how to document a compliance with the interior lights. I can take photos?

Ice Storage and unmet hours

NC-2009 EAc1: Optimize Energy Performance
posted by James Chueh on May 10, 2012, 6:38 am

We are considering using ice storage in one of the LEED NC project. The cooling peak load is calculated to be around 550...

Monitoring system required?

CI-2009 IEQc7.2: Thermal comfort - verification
posted by Dave Intner on Feb 8, 2010, 6:14 pm

Are you certain this must be provided in addition to a survey for NC and CI projects? The CI reference guide (page 389) states "Analyzing environmental variables (typically by monitoring space...

Last reply: Maria Porter, May 10, 2012, 2:53 am

statistics and consistency

General forums
posted by Susan Walter on Apr 30, 2012, 3:17 pm

I think it would be very interesting to have statistics posted on credits. I know some of them from researchers and clients react well to them. It is also helpful to know that the SSc8 credits...

Last reply: Susan Walter, May 9, 2012, 5:35 pm

Furniture/systems furniture use in IEQc8.1

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Tiffany Moore on Apr 4, 2012, 12:11 pm

I've been trying to find a confirming statement that either includes or excludes furniture/systems furniture from the daylight calculations of IEQc8.1, but have not been successful. The visual...

Last reply: MAUDE PINTAL, May 9, 2012, 3:26 pm