interpretation. In my case, would an owner owned parking lot near the building butt outside the LEED Boundary need to be covered? Lets say, within my LEED Boundary there are only 50 spaces, all underground, and nearby but outside the LEED Boundary the owner owns a parking lot with 150 uncovered spaces. Would I need to cover 50 of those spaces to meet this credit? Or do I already meet the credit with 100%...

approach since you will still get water savings from your blow-out fixtures opposed to the zero savings that you would get if you followed the guidance and put both your baseline and proposed at 3.5 gpf....

it exposes workers to an alkaline corrosive; we manage risk. In the case of chemicals management, that involves hazard communication, application of engineering controls and as a last line of defense utilizing...

The bottom line is that material selection criteria probably should all be moved to MR since they are probably best merged into one credit set to encourage joint assessment of overlapping and sometimes...

to be finished. About the SI issue, yes you are right about the LEED-Online forms but, to my knowledge, in many Latin American countries most of the forms are filled in off-line, and then the LEED-AP or team...

Attributes (whew....MR 5."whatever" would be a LOT easier....) you'll notice that Bio-Based materials are specifically designated as "Structure and Enclosure" and NOT Non-Structural....

Our project is located in a small, tight suburban lot. The only landscape requirements within the zoning information is that A) 5% of the parking lot must be landscaped, B) any retention areas must be landscaped (not within our site boundary) and C) the landscape setbacks must be landscaped (also not within our site boundary.) Basically our landscaped area = 20% of our parking lot paved area. We think this meets the requirement for SSc5.2, BUT are worried that LEED will make us use the 20% of the site area. Which we do not meet- we are currently landscaped 12% of our site area. But if we follow our 5%...

Norma Lehman Principal The Beck Group LEEDuser Basic Member 133 thumbs up September 26, 2011- 3:11 pm I use Google Earth to map the radius and services. The Ruler tools allows you to draw a 1/2 mile line from the project site. Drop and label pins at the project site and 1/2 mile radius. There are several icons available for various services if you like. I then take a screen shot of the site w/...

Member 6 thumbs up October 19, 2017- 3:25 pm I am working on a hotel project that has a surface valet parking lot for hotel guests' cars. The lot will provide several EV charging stations for electric...

Daycare Center- Bike Racks on Lot Boundry My Bicycle Parking Racks are located on the Lot Boundry. On the otherside of the fence, through the always open gates is the public side walk. How should I (why should I) proove/plan "dedicated bike lanes in two directions". This came back as lacking the "site plan showing"...from the reviewers. There is a 20 m walk way to the main entrance from the racks. Please help. SSc4.1 ...