100001854

Table 2.
• SS Credit Joint Use of Facilities: Data Centers should say NA
• MR Credit Purchasing – Ongoing: 1 point
• MR Credit Purchasing – Lamps: 1 point
• MR Credit Purchasing – Facility Maintenance and Renovation: All 2 points; replace "Management” to “Maintenance”
• MR Credit Solid Waste Management – Ongoing: All 2 points

100001942

Remove last line of the vertical illuminance definition so that it reads:
"vertical illuminance illuminance levels calculated at a point on a vertical surface, or that occur on a vertical plane"

100001944

Revise the section to read:
"The lighting boundary typically coincides with the property lines of the property that the LEED project occupies. However, in certain situations the lighting boundary may be modified:
• When the property boundary abuts a public area that includes, but is not limited to, a walkway, bikeway, plaza, or parking lot, the lighting boundary may be moved to 5 feet (1.5 meters) beyond the property line.

100001966

Private or private use applies to plumbing fixtures in residences, apartments, and dormitories; private (non-public) bathrooms in transient lodging facilities (hotels and motels); and private bathrooms [and patient rooms] within hospitals and nursing facilities.

Add the following to eligible fixtures section:

100001928

Table 1. Example calculation for multiple criteria
In 4th column labeled "Contributing value" change the row for "Extended producer responsibility" from "2,000" to ".5 X $2,000 = $1,000", change the total from "$5,200" to "4,200".
In the 2nd column labeled” Criterion” change the row for “Recycled content (60%) to “Postconsumer recycled content.” In the same column, change the row for “Cradle-to-Cradle v2 certified” to “Cradle-to-Cradle v2 Gold”

100001940

Under the second first-level bullet (energy-related research and analysis), replace the second-order bullet set with the following:
• Building envelope and façade conditions
• Elimination and/or significant downsizing of building systems (e.g., HVAC, lighting controls, exterior materials, interior finishes, and functional program elements)
• Methods planned to gather feedback on energy performance and occupants’ satisfaction during operation
• Other systems