In the header, change "(1 point)" to "(1 - 5 points for NC and CS, 1 - 4 points for Schools)"

Replace "CE" with "(1 - CE)"

Replace text with the following:NC & SchoolsThis credit is not eligible for exemplary performance under the Innovation and Design section.CSProjects that require and enforce tenants to meet the requirements in IEQ Credit 4 (4.1, 4.2, 4.3, and 4.4) throughout the tenant space are eligible for exemplary performance under the Innovation in Design section.

In alphabetical order, add the term "Gross floor area (based on ASHRAE definition) is the sum of the floor areas of the spaces within the building, including basements, mezzanine and intermediate‐floored tiers, and penthouses with headroom height of 7.5 ft (2.2 meters) or greater. Measurements must be taken from the exterior 39 faces of exterior walls OR from the centerline of walls separating buildings, OR (for LEED CI certifying spaces) from the centerline of walls separating spaces. Excludes non‐enclosed (or non‐enclosable) roofed‐over areas such as exterior covered walkways, porche

Revise the definition for "existing" to read, "existing present on the date of submission of the first LEED-ND certification documents; similarly, an element or condition that exists is present on the date that LEED-ND certification documents are submitted. Elements or conditions created as part of the LEED-ND project are not considered existing."

In the column header on the far right, replace "Absorption" with "Centrifugal" so the header becomes "23-Year Life (Screw, Centrifugal Chillers)"

In the seventh line of the paragraph, replace "(1 MBtus/1,000 MBtus)" with "(10 MBtus/1,000 MBtus)"

In the third line, insert "of" after "purchase" so the text becomes "The purchase of Green-e certified RECs..."

Make the following text bold, "ASTM E408-71(1996)e1, Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques".

Make the following text bold, "ASTM E408-71(1996)e1, Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques".