ad-100000201

In the sixth row, replace "WE Credit 4 Cooling Tower Water Management" with "WE Credit 4.1 Cooling Tower Water Management - Chemical Management" and, below as a new row, "WE Credit 4.2 Cooling Tower Water Management - Nonpotable Water Source Use"

ad-100000200

Replace the text in the third paragraph titled "Volume Captured viaRetention Facilities" with the following:"For less complex sites without detention facilities, teams can perform awater balance to determine if a proposed reduction in impervious areaand/or rain capture systems will result in the required reduction in siterunoff.

ad-100000199

Replace the text in the second paragraph titled "Volume Captured via Collection Facilities" with the following:For less complex sites without detention facilities, teams can perform awater balance to determine if a proposed reduction in impervious areaand/or rain capture systems will result in the required reduction in siterunoff.

ad-100000197

In the last line of the paragraph, replace the period with a semicolon and add text so it becomes the following:...performance rates; confirm the program is of equivalent or greaterstringency than SCAQMD; and demonstrate that the programencompasses a small and cohesive enough area to assume reasonablesimilarity of transportation options across the participating buildings.

ad-100000763

Replace text with the following:NC & SchoolsThis credit is not eligible for exemplary performance under the Innovation and Design section.CSProjects that require and enforce tenants to meet the requirements in IEQ Credit 4 (4.1, 4.2, 4.3, and 4.4) throughout the tenant space are eligible for exemplary performance under the Innovation in Design section.

ad-100000762

Replace text with the following:NC & SchoolsThis credit is not eligible for exemplary performance under the Innovation and Design section.CSProjects that require and enforce tenants to meet the requirements in IEQ Credit 4 (4.1, 4.2, 4.3, and 4.4) throughout the tenant space are eligible for exemplary performance under the Innovation in Design section.

ad-100000761

Add the following paragraph after the second paragraph: Individual comfort plug-in devices are acceptable for meeting the intent of this credit provided they are included in EA Prerequisite 2: Minimum Energy Performance and the proposed design model but not in the baseline model for EA Credit 1.3: Optimize Energy Performance, and EA Credit 1.4: Optimize Energy Performance--Equipment and Appliances as appropriate.

ad-100000758

At the end of paragraph, add the following text:For projects that are a combination of renovated and new construction, use the following equation to determine minimum energy cost savings percentage for each point threshold for each line of the table:Target Percent = (Existing SF/Total SF)*Existing Percent + (New SF/Total SF)*New PercentOR