Our C&S project includes in the LEED Project Boundary: (1) UNDERGROUND PARKING GARAGE AND EXTERIOR SPACES (BASE BUILDING) (2) commercial spaces (tenant spaces), which correspond to the 100% of

There is a data center with a complex occupancy (2 shifts). Day shift is 9 hours, 8:30-17:30; night shift is 15 hours, 17:30-8:30. There are 3 persons per shift.

I opened the link at the top of this page, http://bit.ly/tTjUr5. It indicates that is a draft, dated 2011. Is now a published or new document like this?

In one of our projects (a bank branch) we have 4 parking spaces out of parking lot, only for employees, these 4 spaces are separated of the parking lot by a gate and they are not available for the

We are wondering if our building can be certified with CS: The building is a renovation project in which a developer is fundamentally refurbishing the building base systems and building shell. The

To comply if the requirements of this credit, could we installed CO2 devices, instead of outdoor airflow mesurement device, in non-densely occupied spaces?

I have a project where we only have 3 parking spaces provided, resulting in a substantial reduction from the baseline. However, the client is reluctant to reserve these exclusively for carpools/va

The kitchen consultant on our project has specified a Hobart LT-1 LOW-TEMP CHEMICAL DISHWASHER. While most Hobart products are E-Star, this one is not.

Hello, We are working on a LEED NC 2009 project with DES which the thermal plants consist except boilers and electric chillers also a cogenerator and an absorption chiller. We are thinking to follo

Hi! I have a question similar to the one posted on Nov 18 2013 below.