Forum quick links
School Building
NC-2009 EAp2:Minimum Energy Performanceposted by SSN Energy Model on
Hi, We are doing the Energy Model for SCHOOL Building. The client has proposed Air cooled chiller.
open grid paving and gravel
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by Erin Holdenried on
What qualifies as "open grid paving"? Can a gravel bed designed to be 50% pervious qualify as "open grid paving"? Thanks
Required parking lots and LEED boundary Calculations
CS-2009 MPR3:Must use a reasonable site boundaryposted by kerry wang on
Hi all, We have a question about LEED boundary calculation as below: In order to save the land, our company has set up a shared parking lot in the area, so this project does not have new parking
Multistorey car park
ND-Plan-v4 GIBc10:Solar orientationposted by Elena Verani on
We have a block including three buildings: 2 office buildings and a multistorey car park.
testing by ISO 16000
Retail-CI-v2009 IEQc4.3:Low-emitting materials - flooring systemsposted by Nativa Architecture on
Shall we use a vinyl flooring tested by ISO 16000? It has TVOC
Three buildings, one garden
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Lawrence Lile on
We are developing a farmer's market. It will be associated with a community garden, which grows food for both the farmer's market and the local food bank.
2 buildings = 100% = 5 points?
ND-v4 GIBc1:Certified green buildingsposted by Tommy Linstroth on
We are looking at doing 2 multi-family low-rise buildings. Each building would be LEED for Homes certified - so 100% of the floor area would be certified over 69 units.
n/a
NC-2009 IEQc6.1:Controllability of Systems—Lightingposted by Anastasia Makarenko on
Our site is a renovation of a big confectionary factory.
Signage Comment
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Heather Holdridge on
I submitted for this credit for design preliminary phase review a few weeks ago.
Major renovation for NC and C&S
posted by OSCAR DE LA RED on
If there is not an exterior Work on envelope but there is a core MEP alteration ,could a project be certified as a NC LEED Project (or C&S)?