Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Modeling Heat Recovering Chillers for the Baseline

NC-2009 EAp2:Minimum Energy Performance
posted by  Paula Hernandez  on 

Hello,

I want to know which the energy savings are comparing a Heat Recovery Air Cooled Chiller in the Proposed Building versus it´s equivalent in the Baseline Building.

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Jun 6, 2018, 11:00 am
3
Tue Jun 5, 2018, 11:15 pm

Process Loads

NC-2009 EAp2:Minimum Energy Performance
posted by  Paula Hernandez  on 

Hello,

I am modeling a winery and some of the chillers participate only to chilled and heat wine tanks.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Jun 5, 2018, 5:38 pm

WELL v2: your take

Green Commons
posted by  Paula Melton  on 

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes.

0

from today's Boston Globe: New China policies spark disarray in region’s recycling industry

SC Leaders
posted by  Conor McGuire  on 

https://www.bostonglobe.com/metro/2018/06/04/new-china-policies-spark-disarray-region-recycling-industry/d9QH2JUtnVqRKaAL8kMkiL/story.html

0

Eco-Friendly worksafe solvents

Green Globes Discussion Forum
posted by  Robert Marsh  on 

Removing dust, dirt, allergens, and infection-causing agents like viruses is a key component of a healthy indoor environment and doing it in a Eco-friendly way is best of all the techniques.

0

MEPC's New Construction U-value cannot be changed?

NC-v4 EAp2:Minimum energy performance
posted by  JAMES CHEN  on 

Recently, we will build a two-floors building made of metal material,  but ROOF and WALL of MEPC's New Construction Nonresidential will automatically run U-0.273 and U-0.479, respectively.

1
Tue Jun 5, 2018, 3:09 pm

Using a different Energy Consumption in EAc2 to EAc5 to reflect actual conditions

NC-v4 EAc5:Renewable energy production
posted by  Tim Middleton  on 

We are working on a Manufacturing Project in Vietnam with very high non-regulated loads (around 75% of the total energy consumption).

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Jun 5, 2018, 7:06 am
3
Mon Jun 4, 2018, 8:12 pm

waste rooms

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Francesco Passerini  on 

The project is located in Europe and standard EN 15251 is considered for the achievement of this prerequisite.

1
Thu Jun 7, 2018, 1:05 pm