We are working on a CS v2009 project and we are pursuing the credit SSc9 "Tenant Design and Construction Guidelines". I assume future tenant will be asked to register under the v4 or v4.1 program.

Can anyone confirm what the definition of the above named spaces include?

Since engineered wood products (like glulams, I-Joists, and laminated veneer lumber) don't seem to be defined in CARB, are they still considered a composite wood product by LEED v4 in this credit c

I haven seen this same type of question in the forum before, but in this particular case it is extreme, so I would appreciate some feedback/opinions.

Hi,

for baseline building HVAC selection, we shall follow table G3.1.1A (ASHRAE 90.1-2010), being the system defined depending on the building number of floors and its conditioned area.

Hi, 

We are working on a project that intends to apply a zinc-rich primer whose concentration is below 340 g/L (According to California Air Ressources Board).

Do the showers for the Bicycle Facilities have to be included in the calculations?

Does the shower have to meet ADA requirements?

Is equipment that is powered by gas (such as gas cookers, fryers, ovens) to be included in the list as well or should we just include electrical equipment?