Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Obtaining a Cx Plan and Project Drawings

EBOM-v4.1 EAc2:Grid Harmonization
posted by  Kyle Renz  on 

I'm an undergraduate student at Florida Tech working with a group of professors to help commission the new net-zero energy alumni center on campus.

1
Fri Feb 14, 2020, 12:47 pm

Baseline Building

Hospitality-NC-v4 EAp2:Minimum energy performance
posted by  VICTOR MORENO  on 

what ASHRAE Standard we use to create baseline building of one floor bungalow (hotel)?

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Feb 6, 2020, 4:06 pm

Low-Emitting & Wood Doors

NC-v4.1 EQc2:Low-Emitting Materials
posted by  Brianne Grace  on 

1.  Do I list the wood doors under both Wall Panels and Composite Wood categories?  2.  Does an Indoor Advantage Gold certificate suffice for documentation of the Formaldehyde Emissi

9
Principal
EA Energy Solutions, LLC
LEEDuser Premium Member
17 thumbs up
Thu Feb 6, 2020, 3:53 pm

Pilot Credit - Green Training

NC-v4 INc1:Innovation
posted by  Philippa Cameron  on 

Hi. Does anyone know if it is feasible to successfully meet the requirements for Pilot Credit 'Green Training for Contractors' on international projects?

4
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Thu Feb 6, 2020, 3:49 pm

Anti Termite at early stage

Healthcare-v4 SSp1:Construction activity pollution prevention
posted by  Mohsen Sayed  on 

 Is there any LEED ruling for doing this activity at soil prior to pouring concrete in foundation level, There is no impact on underground water as the project located in desert &nbs

0

Exterior walk-off mats permitted?

NC-v4 EQc1:Enhanced indoor air quality strategies
posted by  Vince Briones  on 

Hi- has anyone gotten verification on whether exterior walk off mats are permitted under v4? The reference guide and current addenda are silent on that detail.

2
Senior Sustainability Manager
WSP
LEEDuser Expert
53 thumbs up
Thu Feb 6, 2020, 1:36 pm

Can we certify the commercial portion only of a mixed use building (residential & commercial) under LEED BD+C ?

NC-v4 MPR2:Must use reasonable LEED boundaries
posted by  Amgad Khattab  on 

We have a mixed-use building (residential and commercial) but physically and completely separated by a wall.

1
Thu Feb 6, 2020, 1:37 pm
2
LEED AP-ND, Principal
Criterion Planners
LEEDuser Expert
231 thumbs up
Thu Feb 6, 2020, 3:10 am

ASHRAE installations mandatory provisions in Major Renovations

NC-v4 EAp2:Minimum energy performance
posted by  Alex Parella  on 

Dear all, We intend to certify and existing office building, which is going to be retrofitted with the following criteria: -No intervention in the envelope -Partial replacement of the HVAC (both

15
Default Avatar
Green building manager
Confidential
LEEDuser Basic Member
13 thumbs up
Wed Feb 5, 2020, 6:19 pm

Mandatory Provisions of ASHRAE 90.1 2010,limit of application

NC-v4 EAp2:Minimum energy performance
posted by  Cédric Marzolf  on 

Hi all,

 

Our building code is less restrictive than the ASHRAE 90.1 2010 for all the lighting controls and efficiency strategies.

5
Default Avatar
Green building manager
Confidential
LEEDuser Basic Member
13 thumbs up
Wed Feb 5, 2020, 6:18 pm