Our project is pursuing EAc3 - Enhanced Commissioning. The reference manual states that the...

Our project was denied credit due to a failed pre-requisite during the final review. The client once us to file an appeal to address the pre-requisite. How long after the final review is...

We have an existing building whereby some of the existing glass will remain however we cannot determine what the thermal properties of the glass is because there is no documentation and the...

It was recently brought to my attention that our Master Site (under the older "block" registration process) has changed since our original design intent. We are completing the Design credit...

OK, so a reviewer directed me to the 2011 ASHRAE HVAC Applications Handbook. I have the 2015 Handbook, and there in Section 53.7 is an equation which, adjusted for units, has differential Pa at...

If I have an Interior Lighting COMcheck completed for a project, is that sufficient enough for upload or do I still have to provide the Lighting Compliance Documentation Interactive Compliance...

The BD+C Reference manual states: "This credit is not eligible for exemplary performance under the Innovation in Design section." However, a response from Tristan Roberts on June 4, 2010 states...

I had a comment on a LEED review in IEQc7.1 to provide a summary table which lists the heating and cooling design parameters used for each space type and the Room Input Reports for each space...

Hi,
I am modeling campus building under major renovation. But since that building was built in 1968, no envelope data available (no spec. no...

Path 1 indicates flush-out needs to be accomplished with 14,000 cu ft. of OA per sq. ft. of floor area while maintaining an internal temperature of at least 60 deg F and no more than 60% RH....