Forum quick links
Greenhouse
Schools-2009 EAc1:Optimize Energy Performanceposted by Lisa Logan on
Client is adding greenhouse to the school project - sort of late in the game. Does this space get included in our energy calcs? I am assuming yes and that there is no way around it.
Signage Details?
NC-2009 SSc4.4:Alternative Transportation—Parking Capacityposted by Marketing Coordinator on
Hi, I'm working on a LEED 2009 for Schools project and just rec'd my Design review comments.
Tenant Layout
CS-2009 IEQp1:Minimum IAQ Performanceposted by Dan Forino on
For our LEED CSv2.0 project, we have been asked to provide a proposed tenant layout for approximately 6 office spaces.
what happens when verification turns up changes?
NC-2009 EAp1:Fundamental Commissioning of Building Energy Systemsposted by Tristan Roberts on
It's a requirement for EAp1 that the CxA verify the installation and performance of systems to be commissioned.
Permeable or Mulched Paths in Calculations
NC-2009 WEc1:Water Efficient Landscapingposted by Terry Gorski on
How would permeable or mulched paths be shown in the LEED Online form calculations? Would they still be considered landscaping, and not irrigated, and left in the calculations?
Non Potable Municiply Provided Well Water
NC-2009 WEc1:Water Efficient Landscapingposted by Sam Keehn on
There is municiply provided water available, called raw water which, as per the standard has less than 5,000 mg/l of Total Disolved Solids.
ASHRAE 62.1 MZ calculator acceptable alternative documentation
NC-2009 IEQp1:Minimum IAQ Performanceposted by Courtney Yan on
We are working on fixing the built-in calculator for IEQp1/c2.
ACP for MRc1.1,4,5?
Pilot-Credits PC1: Life-Cycle Assessment (LCA) of Building Assemblies and Materialsposted by Nathan Lee on
I know this is probably the most basic of questions, so please bear with me. I am trying to figure out the application of points for PC1 and if it is an ACP for the MR credits listed above or if t
FSC, assemblies and recent addenda
NC-2009 MRc7:Certified Woodposted by Steve Loppnow on
We are working with a flooring product that is manufactured with an FSC wood backing and a non-FSC veneer.