Hi all We work on a office project at Marseille France with the Leed CS 2009 ; According to - Table B-3 International Climate Zones Ashrae 90.1 2007 : Marseille / France is located in zone 4 - § B

My project has completed the initial review and I now realize that the peak transient occupancy number I listed in table Plf3-3 is incorrect.

Dear all, we gladly noticed that the Table 1.4 spreadsheet improved a lot. Now it is more like a interactive toolkit. Unfortunately most of the items are just in IP-Units available.

Can anynone clarify if boilers minimum efficiency requirements set in table 6.8.1 F is based on fuel higher heating value (HHV) or lower heating value (LHV)?

Hello everyone, I’m working on a Commercial Interior Project following the simulation´s path, in section 11.3.2 item e, says: “Budget Building system listed in table 11.3.2A shall have outdoor ai

Hello. my project is in outside of USA. Because of that, there are many obstacles to get NFRC test about fenestration. can i omit this test in my project?

I am looking to calculate the FTE for a dormitory project, that includes a lounge space, exterior occupiable roof deck, and a multi-purpose room.

I have a letter from a supplier claiming 58% recycled content for steel; 20% post consumer, 25% post industrial, and 13% home scrap.

I have read too much! More confused now. I am working on a university campus.