LEED Interpretation #10246, out on 10/1/12, makes a pretty big change to documentation requirements for MRc4 (effective for...

Has anyone had any success in receiving an innovation credit point for this with LEED version 2009?

Dear All,

We have a 300,000sqft project, quite technical facility.

It is a design&build contract and the owner is reluctant on taking independent contracts on his own. In...

This project is a hotel: guestrooms are provided with keycards, so when guestrooms are not occupied all lighting fixtures are automatically shut-off. Can credits be taken in the proposed case for...

Determine the interior lighting power allowance by
using the columns designated Space-by-Space Method
in Table 9.6.1. Multiply the floor area(s) of the space(s)
times the...

I have a residential dormitory project with some questions on Table Plf3-3 Total Daily Occupancy. A majority of the building is residential, with a lower level Lobby/Lounge area (Reception and...

Hi All -- I see my question might already be partially answered in the conversation from May 28, 2013. Here's the question: Because the 250 residential units in our project are non-densely...

Hello,

Our project is to build a two-story office building in Indonesia. For cooling, the building will be served by AC using VRF system (ceiling cassette) in each designated space that...

In a swimming pool facility it is very likely that almost all users do take a shower before leave. However, the default fixture use for showers defined in LEED implies that only about 10% of all...

Is Make-up air unit considered as process load?
Since kitchen has its own cooling and heating system. Can i Model MAU in certain schedule to consider gas and electricity consumption (...