Hej! Do ready made concrete elements that are delivered on site count as assembly while in concrete that is cast on site the concrete and steel are two materials? Thanks!

Our project consist in a conversion from a warehouse to a university. but only part of the univeristy is being certified.

According to Interpretation #10209, issued 7/1/2012, it says that if a non-residential SF of a mixed-used building is less than 10% or no greater than 5,000 SF, it is acceptable for the non-residen

Under "LEED Project Submittal Tips: Commercial Interiors 2009", the guide is referencing to Table G3.1-5(F) when applicable for baseline and propose values consistent with Appendix A.

Hi all! My CS project is an office building.

Hello! Our client, (the project owner) has a branch office from another country wherein there are bulk of furniture which were transported 3 years ago to our recently registered LEED project.

So the first AND in this credits as follows: Wall, ceiling and flooring systems and finishes, composite wood, agrifiber and fiberglass products, both exterior and interior adhesives, sealants, coa

We have a meter that measures: chiller + pump + lighting system. Since we are not discriminating by "end use": would this meter qualify towards this credit? Thanks GH

Im a bit confused whether to use overhangs or not in the baseline of the energy model for option 2.