Log in
Forum
Topic

USGBC approved alternate standard to ASHREA 90.1-2007

CS-2009 EAp2: Minimum Energy Performance
posted by Amit Ahiel on Dec 2, 2012, 9:35 am

I'm working on a project outside the US, in the Middle East, and curtain wall consultant has chosen a glazing from a European manufacturer who has provided their equivalent to the Solar Heat Gain...

Last reply: Amit Ahiel, May 1, 2013, 6:28 am

What means with "regularly used exterior entrances"?

CS-2009 IEQc5: Indoor Chemical and Pollutant Source Control
posted by Sandra Holmström on Dec 3, 2012, 7:42 am

Does regularly used exterior entrances means that you can ignore all other entrances except the main entrance to the building? If not, what kind of entrances should meet the credit?

Last reply: Tristan Roberts, Apr 2, 2013, 4:11 pm

Plenum Return Systems

NC-2009 IEQc3.1: Construction IAQ management plan - during construction
posted by Nate Maniktala on Dec 3, 2012, 12:10 pm

Hi All,

Compliance with this credit in fully ducted return systems has been straight forward, however, the LEED Reference Guide is not too clear on how exactly open plenum return systems...

Last reply: Michelle Halle Stern, Jan 21, 2015, 12:52 pm

Conditioned floor

NC-2009 EAp2: Minimum Energy Performance
posted by Rodrigo Dias on Dec 3, 2012, 12:14 pm

Hello

I'm working on a project that has conditioned areas on 6 floors, but in two of those floors has only 5% of all conditioned area , can I consider these floors conditioned as the...

Last reply: Marcus Sheffer, Dec 7, 2012, 9:31 am

Parking garage

NC-2009 EAp2: Minimum Energy Performance
posted by PAWAN DAHIWAL on Dec 5, 2012, 5:01 am

I have modeled parking garage in the simulation by taking 0.75 cfm/sf (exhaust)from ASHRAE 62.1-2007 which leads to energy consumpation of 43,450kWh. And in proposed case we are using CO sensor...

Last reply: Anthony Hardman, Dec 6, 2012, 5:04 pm

BD&C Credit

EBOM-2009 IOc1: Innovation in Operations
posted by Marina Andrade on Dec 6, 2012, 12:23 pm

Hi, can we use a BD&C credit for apply a IO Credit on LEED...

Last reply: Tristan Roberts, Apr 19, 2013, 5:28 pm

Rainwater management

General forums
posted by Pamela Lippe on Dec 7, 2012, 3:31 pm

Can anyone tell me how LEED is defining "in a manner best replicating...

Last reply: Scott Bowman, Dec 11, 2012, 8:28 am

Total builtup area calculation for Developemnt density

CS-2009 SSc2: Development Density and Community Connectivity
posted by Lavanya Veerappa on Dec 11, 2012, 8:37 am

Should the total built up area consider the basemet area as well ?

Last reply: MOHAMMED ISMAIL, Dec 14, 2012, 1:34 am

NO DENSILY OCCUPIED SPACE IS AT OUR PROJECT

CS-2009 IEQc1: Outdoor Air Delivery Monitoring
posted by Michael E. Edmonds-Bauer on Dec 11, 2012, 11:57 am

Our project is a CS building with only a few areas within the reach of control of de developer, basically the building staff offices and they will never reach 25 people per 1000 sqft.

Does...

Last reply: Ilona Johnson, PE, CEM, LEED AP, Dec 31, 2013, 10:15 am

Innovation points no longer recognized?

NC-2009 IDc1: Innovation in Design
posted by Kris Phillips on Dec 13, 2012, 9:55 am

I have conflicting information on a few Innovation points that have been achieved on certain projects, but are apparently being denied on current projects being deemed "too easy" by the...

Last reply: Kris Phillips, Dec 20, 2012, 11:58 am