Log in
Forum
Topic

Divisions 31 and 32 should be included

General forums
posted by Tristan Roberts on Mar 1, 2010, 11:42 am

Are you referring to a LEED Online sample template or a LEEDuser sample provided here on this site? If the latter, I'd like to correct it if it's off.

The materials cost calculations for...

Last reply: Tristan Roberts, Mar 1, 2010, 2:21 pm

Help with Interpretation!

CI-2009 EAp3: Fundamental Refrigerant Management
posted by Robin Bass on Mar 4, 2010, 2:03 pm

Hello LEED Community at large. . .

My mechanical engineer is interpreting this Prereq. based on the LEED Reference Guide for ID&C which states on page 148 under Section 4....

Last reply: Tristan Roberts, Aug 10, 2010, 12:26 pm

Does a BAS qualify?

EBOM-2009 EAc3.2: Performance measurement - system-level metering
posted by Matthew Macko on Mar 7, 2010, 7:04 pm

Would a building automation system qualify as the submetering system if it could track energy consumption by end-use?

Last reply: Christopher Schaffner, Aug 9, 2010, 8:27 pm

Carpool brochures

NC-2009 SSc4.4: Alternative transportation - parking capacity
posted by Gregg Schwieterman on Mar 15, 2010, 2:23 pm

Is it a requirement to upload information on how the preferred parking will be communicated to the building occupants? The project is non-residential, parking capacity does not exceed minimum...

Last reply: Curt Pascoe, May 3, 2013, 9:12 am

Help with Interpretation!

CI-2009 EAp3: Fundamental Refrigerant Management
posted by Dan LeBlanc on Mar 18, 2010, 12:13 pm

What is clear is that all equipment within the LEED-CI scope must be CFC-free. Whether this extends to the base-building systems is still unclear. Although the prerequisite seems to include only...

Last reply: Shillpa Singh, Aug 6, 2010, 3:23 pm

Rain fall event interval

EBOM-2009 SSc6: Stormwater Quantity Control
posted by RASHID HAMEEN on Mar 24, 2010, 7:53 am

In the calculation section of the guide it says that we need to have the rainfall event interval to calculate the minimum drawdown rate.To what is this event interval refers to? is it the maximum...

Last reply: Noriko Nagazumi, Nov 21, 2014, 4:33 am

ASHRAE Mandatory Provisions for Building Envelope

NC-2009 EAp2: Minimum Energy Performance
posted by Maya Karkour on Mar 30, 2010, 6:07 pm

Hi,

We are a UK-based consultancy, working on LEED for a mall, and we have a bit of trouble interpreting some of the terminologies & requirements of ASHRAE Tables 5.5 for Building...

Last reply: Gustavo De las Heras Izquierdo, Dec 3, 2019, 6:04 am

Representative Floorplans

General forums
posted by Shannon Gray on Apr 6, 2010, 9:22 am

Yes, this linked document would be a floor plan that was uploaded as the part of the general project documents. The intent here was to make things easier on us. But, in reality it doesn’t work...

Last reply: Tristan Roberts, Oct 8, 2010, 10:10 am

Applying ASHRAE 62.1 to an existing building

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Jennifer Wehling on Apr 8, 2010, 7:12 pm

We are doing a major renovation on an existing building. The project is seeking LEED NC certification and we are having trouble interpreting how the ASHREAE 62.1 standard needs to be applied to...

Last reply: Tristan Roberts, Dec 28, 2010, 11:37 pm

Vestibules in 90.1

General forums
posted by Christopher Schaffner on Apr 9, 2010, 10:43 am

Yes, ASHRAE 90.1-2007 requires vestibules. Therefore it becomes a requirement in LEED v3. In many states, vestibules were already required as part of the building code already.

There are...

Last reply: Tristan Roberts, Nov 4, 2013, 12:42 pm