Hi! Our site is located in Minneapolis and is a rather complex historic urban infill site. Three quarters of a former industrial site's entire city block was redeveloped by our client.

I received the following comment from a LEED reviewer; "The LEED Form states that the project is mechanically ventilated and that the ventilation system has met the minimum requirements of ASHRAE

hi all, we are doing a feasibility study on a CS major renovation project located in South Italy.

Hello, We were under the impression that painting 100% of our roof areas with SRI tested compliant paint in accordance with the manufacturer technical instructions would meet the requirements of c

Can we consider the IBR (Institut für Baubiologie in Rosenheim) an approved seal which is compliance with LEED v4 requirement for VOC emissions? Attached you will find information regarding VOC te

When submitting energy models to NYC we have to fill out a form called an EN-1 that is very similar to Table 1.4 and provides the same information. Can we provide the EN-1 in place of Table 1.4?

We work on a project that has Drycoolers, all water user is non-potable. Since there is no closed loop and make up water this system there no treatment. Can we pursue both 4.1 and 4.2 credits?

We are working on a college campus and does anyone know if a college bookstore could count as retail? It is open to the general public.

Hi, what surface type should be used for overhang construction if using Addendum i or 90.1-2010 version?

I have a client who has chosen to meet MPR#6 by selecting Option 2: USGBC Approved Data Template.