Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Adhesive for acoustic insulation on ventilation instalation

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Andrzej Gutowski  on 

Doea anyone could advise what category of adhesive would be that? Would that be up to material used for acoustic insulation?

1
Mon Jun 26, 2017, 9:25 pm
Default Avatar

Horizontal and vertical footcandles documentation

CS-2009 SSc8:Light Pollution Reduction
posted by  Anna Korinkova  on 

Hello, I have a question regarding the horizontal and vertical footcandles. In our understanding, the horizontal footcadle means that the illuminaiton is measured at horizontal plane (i.e.

0

Glisofat

EBOM-v4 SSc5:Site management
posted by  Emmanuel Pauwels  on 

There are contradictory studies related to the use of glisofat as a herbicide. Would spraying with a mixture containing 30% glifosat be an aceptable practice?

1
Tue Jun 6, 2017, 3:22 pm

Stores ventilated with air from common areas in a mall?

CS-v4 EQp1:Minimum indoor air quality performance
posted by  Billy Condor  on 

Hello, I'm the CxA and energy modeler for a new big C&S v4 mall project.

1
Tue Jun 13, 2017, 5:44 pm
Default Avatar

Project size increase

CS-2009 IEQp1:Minimum IAQ Performance
posted by  Silvia Ruiz  on 

Dear all In a project that we are certificating LEED C&S v3 the owner has modified the OPRs, specificly the project size and the MEP system. 1.

1
Sat Aug 26, 2017, 4:08 pm
Default Avatar

When covering a wide range of products

NC-v4 MRc2:Building product disclosure and optimization - environmental product declarations
posted by  Akira Kataoka  on 

A company is planning to publish an EPD(s) for their gypsum board products.

1
Wed Jun 7, 2017, 6:32 pm
Default Avatar

Estimating the energy cost share of PV

NC-2009 EAc2:On-Site Renewable Energy
posted by  Mohamed M. Abd Elhameed  on 

I am working on an industrial LEED project in KSA.

1
Tue Jun 6, 2017, 3:58 pm
Default Avatar

Estimating the energy cost share of PV

NC-2009 EAc2:On-Site Renewable Energy
posted by  Mohamed M. Abd Elhameed  on 

I am working on an industrial LEED project in KSA.

0
Default Avatar

Pharmaceutical Manufacturing factory project

Healthcare-v4 MPR1:Must be in a permanent location on existing land
posted by  Magda Aghababyan  on 

Hi, We are going to start a new LEED project for a pharmaceutical manufacturing facility building which will be started in a few months.

1
Sat Aug 26, 2017, 3:26 pm

Parametric Rotation Runs for Baseline model of Existing Building

NC-v4 EAp2:Minimum energy performance
posted by  Edgar Arevalo  on 

Since the energy model is based off of an existing building.

1
Tue Jun 6, 2017, 7:55 pm