We have a project that use heat recovery chiller to recovery heat from the waste heat from a nearby data center.

I have been asked to provide IAQ Testing for LDP, and am having trouble finding the distinctions between the normal pre-occupancy sampling for credit 3.2 and the during occupancy sampling of LDP.

Does Service hot water need to be sub-metered to satisfy this credit ? If not will it make the energy model more difficult to calibrate.

I am working on a project that at the initial project team meetings and scorecard review it was indicated that the Phase 1 ESA had been done and that there were no significant issues.

As part of a fit out I the only tenant AHU is for make up air in a Kitchen 2966.4 CFM Can anyone explain the approach to enter this is in LEED form.

The proposed building is a dormitory served using individual fan coils (with no outside air in the fan coils) and the outside air for the building being supplied by a single dedicated outside air u

I am working on a project with commercial food service equipment. The equipment includes a few custom walk-in freezers and coolers.

I'm working on a very suburban site and was wondering if I can include a hotel as part of the minimum 10 unit per acre requirement?

Hello, a question concerning IEQc8.1 & IEQc8.2 . Can we use the net floor area instead of gross floor area for the simulation in Matrix_Table IEQ-1 Daylight and views? I would like to use t

I have a scenario where the core is offset, and is tight to the building envelope on one side. As a result, the egress path around the core on this side falls within the 15' perimeter.