Hi! My project is using double glazing facade, there is inner glass at the floor, then big air gap and the outer glass that is hang by a steel structure.

I am currently working on a fire station building in NC and I'm using HAP 4.8 to model this building vs. the baseline.

Hello. We are in the very first steps in our first LEED Home.

I have a question regarding the Regional Materials Credit: If a product has the following components: - Cement (local product) - Sand (local product) - Additives (imported) Will this product comp

Dear Tristan, If a project is located in a reclaimed land which without previous development (i.e.: the project will be the first development in the reclaimed land), can still meet the requirement

For a building pre-occupancy flush-out what are the requirements for substantiating that the 14,000 cfm of OA was actually completed for the entire square footage.

We have a small two story core and shell project. The owner provided rough ins for plumbing fixtures to be installed by the tenant.

There are around 10 bus stops that are within 1/4 mile walking distance from the building main entrance (Some of the bus stops only have one bus line).

Hello. I am currently working on a tenant improvement project located within a building that was previously LEED certified under the Core & Shell rating system.

how to select the controller effciency manufacturer company? which company is the best and supplies worldwide??