In our project, some of the parking spaces are specific to motorcycles, with smaller areas than in car's spaces.

I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.

I wonder how I should model a Ventilation system to comply with Apendix G ASHRAE, it said that my proposed desing shall be consistent with design documens.. This is the description of my system: &g

If doing a 3,700 sf building in the corner of an existing 18 acre school campus, does the Phase I and possibly Phase II assessment need to be for the entire campus or just the area within the LEED

As subject indicated, how to identify third-part certifying bodies as defined by ISO/IEC 17021.

What if the tenant was not installing any composite wood products within his scope of work? Does it mean that he get's this point automaticly or that he is not eligible for that point?

We have an existing facility (bus maintenance garage) which is attempting to be Certified.

Schools often cannot afford "choice" sites. We have a school with a 155 acre site, 70% of the site is a wetland.

The LEED-NC 2009 EQc7.1 credit template asks us to document the Project Space Design Air Speed at 3 ft above the floor. According to ASHRAE 55, this should be a maximum of 40 FPM.

We have been contracted to design a core and shell building for a large office building. We applied for Core and Shell for LEED 2009.