We have a data center project where the owner decided to design-build a dome structure because of the efficiencies inherent in this type of construction.

Is it safe to assume that faucets that are installed in labs are not included in the water fixture calculations since they are not listed in the reference guide?

I apologize if the requested information is included on this site but I have not seen it to this point. Can anyone give me a definition of what constitutes a stream channel?

Is expected to the next version of LEED, specially LEED EB O&M, any issue about Energy Quality (ex:, sag, swell, harmonics etc) ?

In our jurisdiction, encapsulation of contaminated soils (with a "cap" that contains and prevents leaching) is considered acceptable for remediating a site.

I am trying to complete PI FORM 3: OCCUPANT AND USAGE DATA. However, I cannot seem to find the location to enter the male to female ratio.

i m using HAP 4.41 for HVAC load calculation and energy modeling but unfortunatly the weather data available is hourly average s it ok to use for leed energy simulation or i ahve to go to another f

I am not too clear on the definition of Gross Floor Area and how is the calculation carried out with respect to the CI requirement of alteration to at least 60% of the gross floor area. I thought

In our builing, some regulary occupied spaces are located in B1~B2. To earn this credit 8.2, we decided to make sunken beside B1~B2 wall.

Can a flooring system be tested using the latest version of CDPH test method and still comply to NC 2009? NC 2009, option 2, demands that all flooring products meet the testing requirements of Cal