We are working on a fueling station located in Buenos Aires, Argentina. The form on leed on-line requires filling up the target finder in the Energy star website. The problem is that we are being...

Okay, the baseline model has no overhangs and canopies, but the design has. As per my reviewer comments, I can't take credit for lighting parts of the baseline model (like the facade) if this...

Is it possible to use PHPP software (Passive House Planning Package) for energy modeling on a LEED-NC project? Does anyone have experience with this?
Would an alternative compliance path...

Hello, I am wondering if it is allowed to add additional exhaust fans into the proposed model to extract more hot air from the zone and save more energy on cooling. Is this possible? The zone I...

First time submitting NC 2009 V3 forms. Filling out the EAp2 Section 1.4. xls file. - Seems so redundant to have to fill out this excel form, when all the data can be found in the output files...

Hi,

I am working on a project (Stadium) where the only significative improvement on energy performance is lighting because the COP of the HVAC is basically the same and the envelope is...

I am trying to determine if a project of an Industry ( "New Construction") without HVAC system get some special credit or if it is possible to obtain the 10% improvement between Baseline and...

I have a hotel building with 150 keys aiming for LEED Silver..can anybody advise if all the guest rooms shall have automatic lighting shut-off controls (occupancy sensors, key/card controlled etc...

What if the project don't have any A/C? there are 3 retails, 1 wc. All are separated buildings. What should I do with ASHRAE 5.4, 6.4 and for energy simulation?

The project is a new facility, which has a new construction and renovation component. The new building is 6 stories tall, adjacent to an existing 3 story plus roof deck building. In our project...