Kindly advise on software which can be used in Pakistan, their cost and complexity of use.

We have a five-acre site with multiple buildings. However, we are pursuing certification for only one of the buildings. Does the entire site have to meet the prerequisite?

We have a project space where the built up area is 2 lakh sqft out of which the conditioned space is 1000 sqft. Is energy modeling necessary in this scenario?

I am not quite sure if this is the USGBC's intent, and maybe I'm a nitpicker, but:

-Biofuel "(in some cases)" is eligible, the "some cases" are not further described

My project is an office tenant fitout (1 floor in a high-rise building).

In this project there is only a very limited number of parking spaces (44 for >10.000m² office space).

In relation to car park ventilation that will only operate in the event of high carbon monoxide i.e under normal circumstances will be off.

I have a project, under the current condition, say there are 20% building, 50% of pavement for road and parking, and only 25% left for open space (greenfield) and 5% for wetland (excluding from gre

As we are outside of the USA, ASHRAE 90.1:2010 is a new requirement that came with v4 and our designers have no experience in interpreting and applying the mandatory requirements.