For those of you that attended Greenbuild this year you may have heard about the Legacy project taken on by the USGBCMA Chapter.

I am working on a project that plans to install cubicles with partition heights approximately 5 feet high, likely blocking views from seated height of 42" aff.

The LEED text only discusses what must be done in the first year. Is there any specific term that the MBCx must be done? In other Cx schemes they require two years, life of building, etc.

Requirements state, "Provide dedicated areas accessible to waste haulers and building occupants for the collection and storage of recyclable materials for the entire building." To meet the prerequi

Hello All - It is so wonderful to virtually meet everyone and read through introductions.

On our project, there is no deck, just purlins, insulation and metal roof panels. We'll be reusing the roof and the purlins and likely replacing the insulation.

To be clear, does the upstream equipment in a District Energy System need to be considered for the prerequisite or only for the enhanced refrigerant management credit?  Based on the "project t

Our LEED project is a Commercial Interior that is in a new building that is still under construction.

The link below, fromLEEDuser, indicates that if you can use actual utility bills x 50% x 2 yrs to calculate the required quantity of RECs as opposed to the EAc1 energy model design consumption x 35

Hi All, Kindly clarify baseline LPD to be used for multi-family residential spaces (living room, bed room, kitchen, rest room, etc) as per ASHRAE 90.1-2010.