Forum quick links
Toilets: private or public?
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
In a office building that is occupied by a private firm how shall be considered the toilets according to Table 6.4 of ASHRAE 62.1-2010? Private, since the property is private? Does it depend on the
District plus heat pump
NC-v4 EAp2:Minimum energy performanceposted by Ilaria Piong on
I have a building composed of two parts: a warehouse and an office.
System type for baseline in semiheated spaces
NC-v4 EAp2:Minimum energy performanceposted by Ilaria Piong on
Hello,
District or not district?
NC-v4 EAp2:Minimum energy performanceposted by Ilaria Piong on
I have a building composed of two parts: a warehouse and an office.
exterior lighting: roof
CS-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
Hello, is exterior lighting on a roof (terrace) regulated by ASHRAE 90.1-2007? Or shall it be modelled in the same way (same power and same schedules) in the proposed and in the baseline mode
LEED v4 Outdoor Water Use Reduction Calculator
NC-v4 WEp1:Outdoor water use reductionposted by Clara Pistoni on
Hi All, does anyone try to use the spreadsheet updated on 4/5/2016? In the "Baseline Calculation" sheet, errors occur at anytime I tried to fill in a value under "Monthly Rainfall" or Monthly ET0".
Change a precertification with a certification process
posted by Sandro Paglia on
Goodmorning to all,
MBCx Plan as part of the Ongoing Cx Plan
NC-v4 EAc1:Enhanced commissioningposted by Francesco Passerini on
Can the MBCx Plan be presented as a part of the Ongoing Cx Plan?
Temperatures for Tab.6.8.1I
CS-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
According to Tab.6.8.1I for test procedure for VRF systems we have to consider AHRI 1230. I’m considering AHRI 1230 version “Approved by ANSI on 2 August 2010”.
energy recovery control
CS-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
I’m modelling a System 8 baseline model according to ASHRAE 90.1-2010.
An exhaust energy recovery system is needed according to table 6.5.6.1.