In the designed AHU a cooling coil operates also in order to control the humidity ratio.

Dear All, We are working on a project located in Italy, which would pursue the LEED certification under a 2009 version and we are wondering about the most appropriate rating system to use. The pr

Hi All, I have a question about a project under LEED certification. We are designing the ventilation of one floor below-grade parking garage, situated below an open area adjacent to an office bui

Good morning, we have an area with 4 building. We are certifying each building with a different certification (3 New construction and 1 Commercial interior).

Good Morning, We have a question about the area of storage. We have an area with 4 buildings. Each building has a separate certification.

Good morning, I write to ask your opinion regarding the phrase at the beginning of the credit "If concrete or steel structural elements are applied toward this credit, the project must include at l

We have a new office project inside a campus, there is an existing big parking area serving the campus not adiacent to the building, no parking are allocated inside our LEED boundary and not new pa

For a preliminary review I modeled a building that is heated and cooled by four geothermal heat pumps that are located in a technical room within the building.

We have one unique boiler, that feeds two buildings inside the LEED boundary of the hotel. Must we do two energy models, with two set of input/output reports?

We are developing a building energy modeling of a residential building based on 90.1-2007. The dwelling units have exterior areas (balconies) that have luminaires. These luminaires have to be mod