hello Marcus, i am currently designing a navy lodge and it is 66,420 sq ft.its a Four floor building with 12 guestrooms on each floor about 900 sq.

In an airport LEED project, only the terminal building is going to be certified. In this case how the LEED Boundary should be defined?

Hi, We are currently working on an existing building under major renovation, pursing a LEED certification following NC protocol v.2009.

We are deciding between the use of EN 15251 and the use of ASHRAE 62.1. Do you have experience in applying EN 13779–2007?

A building is composed by three towers that have the basement, the ground floor, and the first floor in common. The system for the baseline model shall be System 8.

Hi, I´m managed a Healthcare buildings. The reviewer advice me that workstation and share multi-occupant spaces must be reported consistently among IEQc6.1 and IEQc6.2 credits.

I'm considering a "Multi-purpose indoor unit for use in 4-pipe systems for the simultaneous production of chilled and hot water by means of two independent water circuits".

Hello, We are pursuing LEED EBOM v2009 for an office complex. The project was built at the same time and has two twin buildings, with independent HVAC systems.

Hello, We hace just received the preliminary review comments for a Data Center.

Hello, We have a very singular high-rise Project in the city centre.