Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Alternative requirements for buildings with high non-regulated loads

NC-v4 EAc5:Renewable energy production
posted by  Tim Middleton  on 

We are working on a Manufacturing Project in Vietnam with very high non-regulated loads (around 75% of the total energy consumption).

3
Default Avatar
Tim Middleton
Technical Manager
VILANDCO
LEEDuser Basic Member
2 thumbs up
Thu May 30, 2019, 8:07 pm
Default Avatar

How to design Evaporative cooling system on eQUEST

NC-v4.1 EAp2:Minimum Energy Performance
posted by  TARUN SACHDEVA  on 

Hi,

 

I'm doing one project on e QUEST in which Evaporative cooling has proposed for the project. 

0
Default Avatar

CIBSE Narrow Plan Requirement

NC-v4 EQp1:Minimum indoor air quality performance
posted by  gjn   on 

Hello everyone,

0
Default Avatar

Option 1 Requirements

NC-v4 EQc1:Enhanced indoor air quality strategies
posted by  Yodi Danusastro  on 

Do we have to meet all the requirement in Option 1 as in mechanically ventilated spaces: A.the Entryway system strategy, B. Interior-cross-contamination prevention, and C.

1
Wed May 15, 2019, 6:13 pm
Default Avatar

Submeter 2 water subsystems but only one system in the building

CS-v4 WEc4:Water metering
posted by  Kristina Pobre  on 

The credit requires to submeter at least 2 of the following subsystems: irrigation, indoor plumbing fixtures and fittings, domestic hot water, boiler, reclaimed water, and other process water.

0
Default Avatar

3 buildings that connected via link-bridge

LEED Guidance for Campuses and Multiple Buildings
posted by  Michael Wahjudi  on 

Hi all. Wanted to seek your comments on consideration of our developments as "single building" so it can fit into one LEED certification.

6
Wed Apr 10, 2019, 11:34 am

Daylight Sensors in Factory Area

NC-v4 EAp2:Minimum energy performance
posted by  N Sai Balaji  on 

Hi,

1
Wed Apr 10, 2019, 3:29 pm

Residential and Commercial Density

Data-Centers-NC-v4 LTc4:Surrounding density and diverse uses
posted by  David Edenburn  on 

We have a project, a DC, that is in the middle of a large industrial park. There are no residential units within miles of the site.

3
Fri Apr 5, 2019, 1:47 pm
Default Avatar

Existing Building Undergoing renovation

LEED Rating System Selection
posted by  Olinayaki S  on 

What is the acceptable percentage of renovation to consider a project is EBOM when the existing building is undergoing renovation?

0

Female Bidets in LEED calculation?

NC-v4 WEp2:Indoor water use reduction
posted by  Hieu Huynh  on 

Hi LEED experts,

1
Wed Jun 26, 2019, 7:06 pm