Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

Drawings can be separately prepared and submitted?

CS-2009 SSc7.2:Heat Island Effect—Roof
posted by  Yuko Murata  on 

We are currently preparing the drawings to submit to USGBC.

3
Managing Partner
Ecoimpact Consulting
LEEDuser Expert
171 thumbs up
Fri Jun 19, 2020, 11:32 pm
3
Default Avatar
MECHANICAL ENGINEER
GE3S ENVIRONMENTAL CONSULTANTS
LEEDuser Basic Member
1 thumbs up
Tue Jun 16, 2020, 4:26 pm

Sisal 100% Natural Fiber Carpet

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  Andrea Tirao  on 

Our project is a museum which targets IEQc4.3. One of the specified carpet for the project is 100% Sisal and we cannot find a manufacturer of Sisal with Green Label or Greenguard certification.

0

HERS index rating USGBC-approved equivalent for projects outside the U.S.

Homes-v4 EAp1:Minimum energy performance
posted by  Micaela Smulevich  on 

We are working with a project outside US, and need information on USGBC-approved equivalent for HERS index rating for projects outside the U.S.

0

Using Recycled Water for Irrigation

NC-v4 WEp1:Outdoor water use reduction
posted by  Abdulrahman Sherazy  on 

Hello everybody. In our project we do not have outdoor water use except for irrigation.

3
LEED AP bd+c - Sr. Architect
Midrar Development Management
LEEDuser Basic Member
16 thumbs up
Tue Apr 21, 2020, 5:47 am

Standby Cooling

NC-2009 EAc4:Enhanced Refrigerant Management
posted by  Lara Cogill  on 

I am working on a large project for which the cooling is predominantly from central chillers providing chilled water. This complies easily with the requirements of EAc4.

3
Sun Apr 19, 2020, 3:15 pm

Can shared vehicles that do not have stops be considered public transport?

NC-v4 LTc5:Access to quality transit
posted by  Kavita Suresh  on 

Is there any guidance for passing shared vehicles (e.g. not stopping at the site) to be considered public transport?

0

Quality Views LEED Calculator - Multiple View Types, Same Space

NC-v4 EQc8:Quality views
posted by  Tahani Khalid  on 

When finding the area of compliance for a single room under multiple view types, does the regularly occupied space that is entered for that space change?

0

how can I calculate actual cost of Material and resource part?

Calculating FTEs
posted by  mohamed nur hashi  on 

I am university student and I am writing my thesis about leed certification, especially cost materials.

2
Thu Mar 26, 2020, 7:36 pm