I noticed LEED v4.1 removes mention of residence and residential. Table 1 removes all 'residence' reference and table 2 removes 'apartment and condominium'.

(posting here for Kira)

Sustainable Design Leaders:

Hello!

Here's a reminder that our call for this month will be taking place next Tuesday, January 14th at 2:00pm ET.

Hi,

I am modeling a C&S building for the Construction Submittal, and I have to adjust the Design Submittal Energy Model because the Owner change the brand of the VRF systems.

Hi

To caluclate the Rc-value we need to know the amount of refrigerant and the cooliing capacity. As LEED v4 puts it:

We have a LEED NC v4.1 project that is currently in schematic design, and the Core Shell construction will be completed well before the TI scope.  I recall reading somewhere that we only need

This must be obvious to everyone but me since I don't see a question on this. Our project is adjacent to a well established bike trail that extends for 10 miles or more in both directions.

With the advances in exterior LED lighting drivers and controls, would it make sense to look at dimming exterior lights down to say 10% in lieu of turning them off completely from midnight to 6am a

Has there been an equivalency established for LEED v4 projects that use ASHRAE 90.1-2013-Appendix G as reference standard (as there was for LEED 2009 projects that used ASHRAE 90.1-2010-Appendix G

Hello LEED Community,