Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Applies to equipment as well as building lighting?

Healthcare-v2009 MRc4.1:PBT source reduction - mercury in lamps
posted by  Chris Flint Chatto  on 

We have a question whether this credit applies to lighting integrated with medical equipment, or if the credit only applies to permanently attached building fixtures, like the low-VOC and other MR

2
Tue Aug 20, 2013, 2:13 pm

Possibility to register under LEED 2009

General forums
posted by  Francesco Allaix  on 

Thank you for the information Tristan. Would you perhaps know when the registration under 2009 ends.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Aug 20, 2013, 1:49 pm

Where can I find the VOC limits for sealants used as fillers?

EBOM-2009 SSc2:Building Exterior and Hardscape Management Plan
posted by  yan lian  on 

Our review comments has one item, "Provide a revised plan that includes sustainability criteria for sealants used as fillers based on the requirements of BayArea Air Quality Management District Reg

6
Default Avatar
Director of Sustainability
DCS Design
LEEDuser Basic Member
6 thumbs up
Tue Aug 20, 2013, 12:38 am

Construction change will allow us to achieve credit

LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by  Ivy Glasgow  on 

NC 2009 project. Two problems. First, we were denied Credit WEc3 in Design phase re-submittal. This appeared to be because of a glitch in the way the online form calculates the credit.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Mon Aug 19, 2013, 10:34 pm

LEED CI or EBOM First?

LEED Rating System Selection
posted by  Dale Dunnet  on 

We have a client who owns several buildings built 100+ years ago. He currently would like to remodel and certify the 4 office suites in one of the buildings under LEED CI.

3
Default Avatar
Design Coordinator
Miles Construction
LEEDuser Basic Member
0 thumbs up
Mon Aug 19, 2013, 10:13 pm

Older existing building - no VLT available

CI-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Mike Stopka  on 

Has anyone else experienced this? We are doing a Commercial Interiors project in a building that was constructed in the 1950s.

3
Mon Aug 19, 2013, 7:54 pm
3
CEO
ECON Group
LEEDuser Basic Member
126 thumbs up
Mon Aug 19, 2013, 4:55 pm

Dual toilet flush rate average

NC-2009 WEc3:Water Use Reduction
posted by  Mike D  on 

If we were to calculate the average flush rate of a dual flush toilet (with urinals present in the space) we use the example average flow rate equation provided by USGBC in their Appendix A water c

2
Default Avatar
Sustainability Architect
LEEDuser Basic Member
88 thumbs up
Mon Aug 19, 2013, 3:50 pm

Option 1, Equipment Efficiency - Reuse of Existing Equipment

CI-2009 EAc1.3:Optimize Energy Performance—HVAC
posted by  Tony Ricketts  on 

Hi all, I have a tenant fit-out project served by water source HPs.

3
Default Avatar
Mechanical Engineer
CJL Engineering
LEEDuser Basic Member
22 thumbs up
Fri Aug 16, 2013, 5:39 pm

Residential Default Fixture Uses

NC-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Tomas Kurka  on 

Hi, I am working on LEED certification of hotel project.

2
Fri Aug 16, 2013, 4:16 pm