Forum quick links
Existing Fixtures in the Tenant's Space
CI-2009 WEp1:Water Use Reduction—20% Reductionposted by Matthew Catterall on
We have a project that is a renovation to part of a tenant's existing space.
Taxis- considered "alternative transportation" or "drive alone"?
EBOM-2009 SSc4:Alternative Commuting Transportationposted by Helen Samuel on
Is a taxi considered to be "alternative transportation"? I would think that it is closer to "drive alone" since it would be a single user, and therefore wouldn't meet the credit intent.
Our clients want to use a
CI-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Susan Di Giulio on
Our clients want to use a 100% cashmere goat hair carpet tile made by Tretford in Great Britain in a special conference room.
EAp2 Option 2 Advanced Energy Design Guide
NC-2009 EAp2:Minimum Energy Performanceposted by Debra Sypien on
In order to comply with LEED 2009 EA prerequisite 2 option 2, is it necessary to follow both daylighting recommendations in the Advanced Energy Design Guide climate zone 5 recommendation table, or
FSC products that include non-wood components
NC-2009 MRc7:Certified Woodposted by Teresa Bell on
If a custom FSC desk is made for a project, the total value of the desk (including the non-wood items such as drawer and door hardware, plastic grommets, and a glass top) would be t
Vestibules for retail shops less 300 m2 - NR
NC-2009 EAp2:Minimum Energy Performanceposted by Jean Marais on
I'd like to use 5.4.3.4 Exception g to exclude the need for vestibules for each shop entrance of the shops that our office building has on the street level.
entry way compliance for shops at street level of office block
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Jean Marais on
We have small shops (less than 100m2) on the street level of our office building. Each shop has an entrance to the pedestrian. How can one comply to the 10ft entry way system?
Required Exhaust Rates - spaces with hazardous gases
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Jean Marais on
Why does the requirement of 0.5 cfm/sf exist when IEQp1 requires 0.5 cfm/sf as the minimum exhaust rate from such spaces (ASHRAE 62.1-2007 Table 6-4)? If you don't have at least 0.5 cfm/sf, you do
Minimum equipment efficiencies ASHRAE 90.1
NC-2009 EAp2:Minimum Energy Performanceposted by Ricardo Sá on
Can anyone please clarify if packaged air-to-water heat pumps (chilled and/or hot water production) have to: 1) comply with minimum efficiency requirements set to for water chilling packages in coo
Energy Savings - Solar Water Heating
NC-2009 EAp2:Minimum Energy Performanceposted by Marina Andrade on
Hi! when i have a solar water heating system, must submit like energy savings? Thanks