Forum quick links
LEED CI 2009 states:
Project
CI-2009 EAc1.1:Optimize Energy Performance—Lighting Powerposted by Michelle Bracewell-Musson on
LEED CI 2009 states: Project teams in California may use Title 24-2005, Part 6 in place of ANSI/ASHRAE/IESNA Standard 90.1-2007. I searched for recent addenda or updates and there aren't any statin
Daylight Simulation at 9am and 3pm
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Maya Karkour on
Hi all, The requirements in the guidance state: "Calculate the daylight illumination for each applicable space using the following daylight criterion: Clear sky conditions at both 9:00am and 3:0
Trellises?
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by Simon Sue on
We are considering trellises with plants and/or vines on top to cover 50% of the parking. Although this is not quite vegetated green roof, it does put the parking under cover.
Sample Form Problem
CS-2009 EAc4:Enhanced Refrigerant Managementposted by BH . on
Applying values to "Refrigerant Impact Calculaton" chart, we have final impact per tone equal to 100 for each device.
Handing out surveys to tenants
EBOM-2009 SSc4:Alternative Commuting Transportationposted by Energy Spectrum on
Does anyone have any suggestions as to the most effective way to distribute surveys to approximately 1000 office building tenants. There is one main lobby/elevator bank by the entrance.
Actual Power Usage
CI-2009 EAc4:Green Powerposted by Richard Navarro on
Hi, We are in the midst of our final submission and we have decided to submit for this credit. The building just went online end of January.
Calculator template
EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by American University on
Does anyone have an excel template that they created to calculate the baseline vs. installed case? I've been working on it, but it is complicated. Email: curley@american.edu if so. Thanks!