How should I select the column "Space Usage Type" for each space. My criteria is to assign the type of space which each particular room serves.

This may be a very simple question, and perhaps our team is looking into this too deeply: We have a campus which we intend to use a Master Site with individual registrations (i.e. not a group).

We are working in a project that has a gas-fired boiler that supplies hot water for space heating (radiant floor) and domestic hot water. Do we need to comply with efficiencies in tables 6.8.1F an

If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time.

Dear LEED, We are designing a medical office with VRF system, to fulfill iaq requirements we add independent outdoor air unit comprises of supply and exhaust fans on each zone.

Hi all Can u suggest the Ventilation rates for the Production / manufacturing areas for a Pharmaceutical clients because ASHRAE doesn't mention any for the Production in the Table 6-1

Hello, I am documenting this credit using the simulation method. For many of the regularly occupied spaces, the rooms are above the 10fc requirement except for a small corner of the room.

For LEED-Healthcare MRc4.1, can you confirm that the rated hours criteria is for the lamp or the ballast?

We are planning on sending out an emailed link to an online electronic transportation survey on a Monday to survey our building's entire tenant population about their commute for the prior week (M-

Working on a core & shell project that is planning to install a PV system sized to offset 1% of total building energy cost.