Forum quick links
ATM and Driving School
NC-2009 SSc2:Development Density and Community Connectivityposted by Michael Wahjudi on
Hi all, need to get some guidance here. Can ATM considered as "bank"? Since the ATM is having full capability of banking services, except opening bank account.
Dormitory Lighting
NC-2009 IEQc6.1:Controllability of Systems—Lightingposted by Laura Brandt on
We have a traditional dormitory project, where each 170 sf room will house two students, each with a bed, desk and built in cabinet-type closet.
Lighting Power Densities for an auditorium
NC-2009 EAp2:Minimum Energy Performanceposted by Alan Viale on
Hi LEED experts! There is an auditorium in my project, also there will be a stage and a rehearsal.
Greyed-Out credits in Design Submittal
posted by caitlin sweeney on
Hello - I have finished all of my design credits and am about to submit them. When I pressed 'submit', the active credits were highlighted.
Cut Sheets for re-used Furniture?
CI-2009 MRc5:Regional Materialsposted by Katie Peterschmidt on
Our CI project has a large amount of re-used furniture, which we will need to provide cut sheets for in order to get to the min 20% threshold.
MRc4 / MRc5 - Concrete
posted by Eric White on
I have a question about the reporting of the cost of concrete between these two credits. Background: MRc4 - Recycled Content.
Hospital Renovation - Occupancy Default Question
NC-2009 PIf3:Occupant and Usage Dataposted by Sara Zoumbaris on
Hi All - We are working on a major renovation of 1 floor that have patient rooms within a hospital.
Compliance for single story building
Pilot-Credits EQpc78:Design for active occupantsposted by Johnathan Woodside on
The title of the pilot credit implies occupant activeness in general, but the credit focuses significantly on staircases as the means of activity.
IEQ 4.4 - does veneer apply ?
NC-2009 IEQc4.4:Low-Emitting Materials—Composite Wood and Agrifiber Productsposted by Denise Bates on
The credit language states: particle board, MDF, wheatboard, door cores, and laminating adhesive used for assemblies. We have a reconstituted teak veneer that will go on wood panels and doors.
CO2 sensors
NC-2009 IEQc1:Outdoor Air Delivery Monitoringposted by Emmanuel Pauwels on
We are working on an office project. The typical floor will be a completely open space, with workstations and meeting spaces (not enclosed). This will not be a densely occupied space.