My project is located in a hospital campus and I am targeting this credit for 5 points; 3 for community connectivity and 2 for development density.

Further to a preliminary review of project located outside the U.S.

We have a mixed use building major renovation on a Government site. There are shops and maintenance areas, some that have unique exhaust systems. Our designer has addressed these requirements.

We are seeking LEED certification for a new office building. A new separate parking garage building (under the same construction contract) falls within the LEED Boundary.

Since the credit template is not linked to the Gross Floor area in PIf2 (as it is in other relevant credits), does that mean the floor area in the flushout calcs should be net area, as it is done f

Hello, I have read to Reference Guide EMOB 2009 and cannot decide if a bike rack that will be permanently installed on the exterior of the building would comply here?

The reviewer has asked us for the existing envelope conditions prior to retrofit to be modeled consistent with the requirements of ASHRAE 90.1-2007 Table G3.1.5(Baseline)(f) which says " For existi

The project we are working on is a shopping mall. We are calculating airflow rates according to ASHRAE standard.

Will the LEED CS 2009 Alternative Compliance Path continue through to LEED version 4?

We have nearly completed a LEED Silver project and they are still asking for simulation calibration procedures, calibration parameters, frequency of measurement and calibration accuracy for the EAc