Dears:- we have open office with 20 Desk.in every desk three occupants are working.That three occupants do the same operations in 15 desks in remaining desks they do different activities How can

Hi, Regarding the Energy Performance Calgulator that should be used instead of Table 1.4, my questions are: 1.

We are going to start LEED project (Gold, points 66) in RMG factory at Bangladesh , if we will not consider in energy modeling for v3, that will accept or not , and required then which energy model

We are looking to certify nineteen concession spaces in an existing airport. The spaces all share one mechanical system and one water source and do not appear to be sub-metered.

I just would like to confirm that we can use the renewable energy used in our buildings as part of the calculation for energy saving as is done in LEED NC. Is this correct?

I was wondering if somebody could help walk me through this aspect of PIf1. My project is a University building in which we will have limited monitoring.

Option 2 states: Recycled content. Recycled content is the sum of postconsumer recycled content plus one-half the preconsumer recycled content, based on cost.

In the past 6 months we have noticed that a high recycled content of 70% or more has been required on acoustic ceiling tile.

Hi! I'm working on a one-story dormitory project.

We are trying to respond to Prelim. Design review comments on a LEED-HC v2009 project for an Inpatient Hospice and Palliative Care facility.