Paula Melton
Editorial Director
BuildingGreen, Inc.
LEEDuser Expert
159 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Reuse of laboratory equipment and furniture
NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materialsposted by Isabel Santos on
Dear all, We are assessing a renovation project according to LEED v4.
4
Thu Aug 25, 2016, 10:21 am
Non potable water systems
NC-v4 EAc1:Enhanced commissioningposted by Gustavo De las Heras Izquierdo on
Does anyone know if non-potable systems are included in the scope of this credit? I am referring to gray water, stormwater, water treatment plant and irrigation systems. Thanks
9
Sustainability Consultant
NORESCO
LEEDuser Basic Member
3 thumbs up
Wed Aug 24, 2016, 5:05 pm
GRI Sustainability Reports
Pilot-Credits MRpc53:Responsible sourcing of raw materialsposted by Christine Robbins-Elrod on
It's unclear where GRI-checked reports fall under the credit requirements - would they be considered self-declared for 1/2 value or third-party verified for full value?
2
Sustainability Technical Manager
The Sheward Partnership, LLC
LEEDuser Basic Member
17 thumbs up
Wed Aug 24, 2016, 2:16 pm
Post- industrial Recycled content in Ceramic Tiles
NC-2009 MRc4:Recycled Contentposted by María Fernanda Aguirre on
There is a Company which has sent to us some certificates indicating their ceramic tiles have different percentages of pre-consumer recycled content (depending on the model) according to the next p
3
MKK Consulting Engineers
LEEDuser Basic Member
1 thumbs up
Wed Aug 24, 2016, 10:52 am
Excellent Modeling Guide
NC-2009 EAp2:Minimum Energy Performanceposted by Marcus Sheffer on
In case you have not seen this relatively new guide I would highly recommend it to help with your modeling issues. ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference Manual h
7
ASHRAE BEMP HBDP - LEED GA, Building Performance Consultant
Zonda
LEEDuser Basic Member
14 thumbs up
Tue Aug 23, 2016, 4:18 pm
Normalizaiton
EBOM-v4 EAp2:Minimum energy performanceposted by Muzammal Abbas LEED AP (BD+C) on
I am working on a industrial project registered in Existing building Operation and maintenance located Out of US , that have its own electricity production of 4 Mw through gas engines and its free
11
LEED Project Manager
SIDEworks
LEEDuser Basic Member
1 thumbs up
Tue Aug 23, 2016, 1:01 pm
Typical items types for typical office
NC-2009 MRc6:Rapidly Renewable Materialsposted by Jean Marais on
In your experience, which items must be included as rapidly renewable to achieve 2% by cost. Is it, for example, typical to say 1) Floor covering and, 2) Ceiling panels I am struggling to see how
2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Tue Aug 23, 2016, 6:02 am
leedonline offline?
Navigating LEED Online
posted by Caroline O'Leary on
I have been attempting to access leedonline for the last 20 minutes and receive the following:
This page can’t be displayed
•Make sure the web address https://www.leedonline.com is correct.
•Look for
9
Architect
studio point253
LEEDuser Basic Member
71 thumbs up
Mon Aug 22, 2016, 9:37 pm
control of PIU fans for System 8
CS-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
Shall the PIU fans of System 8 cycle according to paragraph G3.1.2.4?
3
engineer
LEEDuser Basic Member
65 thumbs up
Mon Aug 22, 2016, 8:48 pm
Energy Modeling
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by SAMY Chamy on
Dear All:- How to do energy modeling for LEED CI In LEED CI the energy saving is compared for Space heating and Cooling only, 1.Am I Correct 2.Can we consider different Building envelope for Bo
5
Enginneer
T&T Green
LEEDuser Basic Member
9 thumbs up
Mon Aug 22, 2016, 1:10 pm