If there are city/state/federal restrictions on development such that development in certain areas is prohibited by law, can I include those areas in the LEED project boundary?

we are using polyurethane and silicone sealants and gaskets in fire barriers and glazing works. which LEED standards should I refer to? is VOC a concern? thanks

The reference guide states that CS projects requiring both fundamental and enhanced commissioning for all tenant spaces may be considered for an innovation point.

Hello, I've got a doubt about the time that we should develop the breakdown of energy.

Marcus, I am looking at the on-line form for EAc2 On-Site Renewable Energy. (LEED 2009 for New Construction) The asterisk occurs after each of two Required Signatory boxes.

I'm cross posting from CI MRc1.2: I see this was partially covered in Jean's discussion but I'm going to see if any of you have any further clarification.

You might try posting your question at the forum topic for LEED-ND projects: http://www.leeduser.com/topic/leed-neighborhood-development-leed-nd-forum

I am working on the IEQp1 LEED form and ran into a couple problems when filling out the information.

Is there an ID credit or other credit that can be acheived by providing bottle filling stations in the project? It seems that we could prove the savings of recycling or waste vs.

Is it just me or does the 0.25 gallons per cycle baseline for public metered lavs seem way to high?