Our project is an addition to an existing facility in a previously developed site (existing facility will not be certified, only the new addition).

My question is related to SS credit 4.4 and SS credit 4.3.

Hello - My project submitted, and received approval, of our energy model based on natural gas DHW heating and everything else electric.

How would you clasify at leed online ? a high wear laminate (rubber) ? Thank you very much!

We have found that we achieve a reduction of 44% which we believe should be worth 11 points, yet the template only identifies 6 points achieved while 44% reduction is shown. The percentage reducti

Has anyone successfully used this credit (EBOM - 2009 - MRc6 Solid Waste Managment - Waste Stream Audit) to achieve an innovation and design credit under the LEED 2009-NC rating system? Is there a

This is the IP thread, but I see others have posted general comments here so I'll do that as well. I happened to be talking to Chris Marshall (USGBC staff member) today, and he said something abou

Goodmorning, i haven't understood how to consider the performance of the baseline's chiller: is it enough to consider a costant COP/IPLV ( tab. 6.8.1) or do i need a performance curve?

I have a calculation for preferred spaces that falls less than .5 of a space (7.35spaces = 5% of 147).

We are trying to re-use existing regular gravel from the site for the concrete mix of the new building. Will that qualify for materials reused credit?