We have Project intending to be registered under LEED 2009 BD+C for major renovations.

Dear All, I have two issues where I don't really know what would be the proper solution. 1. After about 10 years one of the compressors in a chiller went wrong and has been replaced.

We have Project intending to be registered under LEED 2009 BD+C for major renovations.

Hi All, I am working on a project with warehouse space which is heated and ventilated with heating capacity greater than 3.5 Btu/hr ft2 and falls under the semi heated space category. My question

We have a project in Rio de Janeiro that is near to the beach (between 1/2 mile).

Hello. I'm working on the design of a hospital and there is a doubt in the table 1.3-1 of the Sound & Vibration Guidelines FGI. The hospital is located 2600ft from the runway threshold .

Would it be possible to claim performance improvement by supplying the toilet fixtures for all tenants without installing them?

Hi, I have 2 questions in relation to the 90.1 Energy Model. 1) Is Dublin (Ireland) in ASHRAE climate zone 5 or 5a. 2) The building to be modeled is a 5 storey building with a basement.

Hi! I have two Core & Shell projects where the landlord is providing showers and changing rooms. There's a toilet inside the changing room area.

My company makes steel storage products. We are 90 miles from Gary Indiana where the raw products are smelted and fabricated into coil and sheet steel produced for us.