Forum discussion

EBOM-2009 EAp2: Minimum Energy Efficiency Performance

See LEEDuser’s guidance on EBOM-2009 EAp2 »

Using historic data

March 29, 2016

Omar Delgado

Mechanical Engineer
EnerMech

LEEDuser Basic Member

20 thumbs up

March 29, 2016

What are the requirements to comply with this prerequisite if using historic data? How much (percentage) lower than the historic average must my current EUI be?

Post a reply

Ben Stanley

Senior Sustainability Manager
WSP - Built Ecology

LEEDuser Expert

250 thumbs up

March 29, 2016 - 6:29 pm

Hi Omar,

If the building is eligible for Case 2 Option 2, the current EUI must be 19 percentile points above the historic baseline. So, it's not a direct percentage lower. You can test out your situation using the Case 2 calculator here http://www.usgbc.org/resources/minimum-energy-performance-case-2-calcula...

Log in or register to post comments

Omar Delgado

Mechanical Engineer
EnerMech

LEEDuser Basic Member

20 thumbs up

March 30, 2016 - 11:04 am

Thank you Ben!

Log in or register to post comments

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

See all forum discussions about EBOM-2009 EAp2

Subscribe to new posts about EBOM-2009 EAp2

Post a new question about EBOM-2009 EAp2

See LEEDuser’s guidance on EBOM-2009 EAp2 »

FAQs about EAp2:

Our building includes a large laboratory space. Can our project benchmark under the Labs21 program?

We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects?

We have a number of buildings on a single campus that we would like to certify at the same time. Is it possible to benchmark the buildings at the campus level?

I have a mixed-use building and am wondering if it is possible to pursue the prerequisite through Case 1. How do we proceed?

We have a building that consists of two attached structures and it’s unclear if we have to consider it a single building or if it should be certified as two separate buildings and benchmarked accordingly. How should we proceed?

How long is an Energy Star label valid to use with a streamlined approach for Case 1?

Our building includes heavy process loads that significantly increase the overall energy use in the building. If we submeter these loads, can we exclude this energy use for benchmarking purposes?

We have installed submeters on our building but the utility bill includes energy use from several other buildings located on the same campus. How do we reconcile this during the LEED review process?

When is it possible to exclude up to 10% of the building from EAp2?

What do I do if the number of building occupants, operating hours, or vacant space changes during the performance period?

If you pursue the streamlined path for an Energy Star label, should the performance period for EAc6 match the 12-month time frame of the label?

How do I account for computers with multiple monitors on Portfolio Manager?

How should I treat vacant space on Portfolio Manager?

View answers »